Re: I THOUGHT THIS DAY WOULD NEVER COME !
[Re: Ron Silva]
#449430
07/23/10 01:46 PM
07/23/10 01:46 PM
|
Joined: Jul 2010
Posts: 791 Bama
Randy..
super stock
|
super stock
Joined: Jul 2010
Posts: 791
Bama
|
|
|
|
Re: I THOUGHT THIS DAY WOULD NEVER COME !
[Re: Randy..]
#449431
07/23/10 02:10 PM
07/23/10 02:10 PM
|
Joined: Aug 2007
Posts: 498 El Dorado Ca
65signet
mopar
|
mopar
Joined: Aug 2007
Posts: 498
El Dorado Ca
|
Are you building those out of stainless?
1965 Plymouth Barracuda 273 M/SA 1970 Plymouth Duster 360/904 10.60s with J heads
|
|
|
Re: I THOUGHT THIS DAY WOULD NEVER COME !
[Re: 65signet]
#449432
07/23/10 07:36 PM
07/23/10 07:36 PM
|
Joined: Apr 2005
Posts: 1,880 USA
Ron Silva
OP
top fuel
|
OP
top fuel
Joined: Apr 2005
Posts: 1,880
USA
|
I am making my headers out of Mild steel. Stainless is a pain in the butt. You either have to back purge the tubes with argon when you weld them or apply flux to the inside of the tubes before you weld. Plus it is harder on all your tools etc. I guess if you work with it a lot, it is not so bad.
These are going to be 1-7/8 X 2 X 2-1/8 with merged collectors.
SRT DEMON ONE SEAT
|
|
|
Re: ONE DOWN , ONE TO GO !
[Re: 9 Sec Phill]
#449437
08/05/10 01:53 AM
08/05/10 01:53 AM
|
Joined: Apr 2005
Posts: 1,880 USA
Ron Silva
OP
top fuel
|
OP
top fuel
Joined: Apr 2005
Posts: 1,880
USA
|
The only headers I had any experience with are the TTI's. W2/W5 X 1-7/8 But they would cover part of the center ports. I actually used the TTI flanges but had to completely rework the center ports and all the bolt holes were oversize, so I had to rework that too. Plus most one piece headers are a PITA to install. So, in the long run it's better for me to make my own.
Last edited by dragrcr97; 08/05/10 01:54 AM.
SRT DEMON ONE SEAT
|
|
|
Re: ONE DOWN , ONE TO GO !
[Re: topbrent]
#449439
08/05/10 10:57 AM
08/05/10 10:57 AM
|
Joined: Apr 2005
Posts: 1,880 USA
Ron Silva
OP
top fuel
|
OP
top fuel
Joined: Apr 2005
Posts: 1,880
USA
|
Quote:
Ron,
Looking good! What are the tube lengths on your headers?
Long, and F-ing long! LOL Well, I shoot for the shortest tube to be no shorter than 34" (since I have an automatic trans). On that header above, the #8 cyl would be the shortest and I measured it at roughly 40", so I am good. The ones that go through the K-Member are 50+ inches, probably something like 55"
There is another reason I built these headers. I welded the V-Band rings to the collectors and assymbled them to the secondary exhaust system in the exact same place as the crate motor collectors were. That way the headers and engines will directly interchange with no secondary exhaust mods. It also gives me a solid, repeatable location to build each tube to. That is extremely important when building headers.
There is a method to my madness
SRT DEMON ONE SEAT
|
|
|
Re: ONE DOWN , ONE TO GO !
[Re: MIKES_DUSTER]
#449441
08/05/10 06:27 PM
08/05/10 06:27 PM
|
Joined: Feb 2007
Posts: 2,578 sweden
1Fast340
master
|
master
Joined: Feb 2007
Posts: 2,578
sweden
|
Quote:
Quote:
.....
Can ya make some for me????
i gues that design pictured could easily be reverseenginered for production with a basic mandrelbending machine, wouldnt need to be a cnc or/and boostassisted bender or anyting special, just a good mandrelbender with the right equipment for making a program for it and opereted buy someone who is good at it, there could be some money in that just a few trial and error tubes to get the settup right looks real good,cant wait to here a testdrive report on this beast
|
|
|
Re: ONE DOWN , ONE TO GO !
[Re: 65signet]
#449443
08/11/10 12:34 PM
08/11/10 12:34 PM
|
Joined: Apr 2005
Posts: 1,880 USA
Ron Silva
OP
top fuel
|
OP
top fuel
Joined: Apr 2005
Posts: 1,880
USA
|
Finished the other header last night and reinstalled it on the car. Now I have all day today to let it eat.
SRT DEMON ONE SEAT
|
|
|
Re: ONE DOWN , ONE TO GO !
[Re: 9secondsatellite]
#449448
08/11/10 10:08 PM
08/11/10 10:08 PM
|
Joined: Apr 2005
Posts: 1,880 USA
Ron Silva
OP
top fuel
|
OP
top fuel
Joined: Apr 2005
Posts: 1,880
USA
|
Engine was born at 4:30 PM California time today.
SRT DEMON ONE SEAT
|
|
|
Re: ONE DOWN , ONE TO GO !
[Re: Ron Silva]
#449449
08/11/10 11:21 PM
08/11/10 11:21 PM
|
Joined: Mar 2007
Posts: 12,032 Finally a HUSKER again
Moparnut426
I Live Here
|
I Live Here
Joined: Mar 2007
Posts: 12,032
Finally a HUSKER again
|
Quote:
Engine was born at 4:30 PM California time today.
Congrats, Is it a boy or a Girl?
Did it scream right away or did the little guy have to get stretched out and awake first.
Kasey
|
|
|
|
|